Best Quality FBE coated 1000mm diameter SSAW spiral welded steel pipe for port construction project
Product Name | Anti-Corrosion Steel Pipe |
Usage | Long distance water transportation, petroleum and gas transmission and chemical industry |
Standard | API 5L PSL1/ PSL2 , ASTM A252, EN10219, AWWA C200, ASTM A53, BS, JIS, etc... |
ASTM A 53 | Gr. A, Gr B, Gr C, Gr.D |
API 5L | A, B, X42, X46, X52, X56, X60, X65 X70 |
GB/T9711 | L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555 |
ASTM A252 | Gr.1 Gr.2 Gr.3 |
EN 10219 | S235JR, S275JR, S355JR, S355JOH, S355J2, S420... |
Outer Diamter | 219.1mm - 4064mm (8" - 160") |
Wall Thickness | 4 mm - 25.4mm |
Length | Up to 96m |
Spiral Steel Pipe is made by rolling low-carbon carbon structural steel or low-alloy structural steel strip according to a certain spiral angle into a tube blank, and then welding the tube seam together. It can be made with a narrower Strip steel produces large diameter steel pipes. Its specifications are expressed by outer diameter wall thickness, and the welded pipe shall be ensured that the hydraulic test, the tensile strength of the weld and the cold bending performance must meet the requirements.
Advantages of spiral welded pipe: (1) Steel pipes of different diameters can be produced using strip steel of the same width, and steel pipes of large diameter can be produced from narrow strip steel. (2) Under the same pressure conditions, the stress of the spiral welded seam is smaller than that of the straight seam, which is 75% to 90% of that of the straight seam welded pipe, so it can withstand greater pressure. Compared with the straight seam welded pipe of the same outer diameter, the wall thickness can be reduced by 10% to 25% under the same pressure. (3) The size is accurate, the general diameter tolerance does not exceed 0.12%, the deflection is less than 1/2000, and the ovality is less than 1%. Generally, the sizing and straightening process can be omitted. (4) Continuous production is possible. In theory, long steel pipes can be produced, with small head and tail loss, and can increase the metal utilization rate by 6% to 8%. (5) The equipment is light in weight and low initial investment. It can be made into a trailer-type mobile unit to directly produce welded pipes at the construction site where the pipeline is laid.